The K-TERM 82 mobile control unit is used for mobile data collection and for steering external consumers. The device is equipped with various communication interfaces and analogue and digital inputs.
The device can be operated in the following modes:Connect to DMR radios
The device can be connected to a DMR radio via USB. Outputs can be steered via data transmission. Changes to inputs are transferred via radio data transmission.Standalone mode
The K-TERM programming languages are used to program control sequences in the K-TERM 82. The device works according to the programmed sequences..
With the K-TERM 82 protocol for serial control, all inputs and outputs can be managed.
The device also has various connectors that can be used for special customer applications (LAN, CAN).
Please contact us for further information.
Input - Output
All In- and Output's are protected against inverse voltage and short circuit. They all have thermal protection on overload.
IP data transfer
If the K-TERM 82 is equipped with an IP module, TCP or UDP data are transmitted transparently via the radio channel.
Each station can be set individually as :
- UDP Receiver and Sender
- TCP Server
- TCP Client
Data is transmitted in packets of maximum 1000 bytes.
The K-TERM CPS program is used to configure the K-TERM82. A programming box is also required.
In- and Outputs
K-TERM82 SU/S1-USB (USB,RS232,24xIO)
8 analog inputs
16 digital inputs
16 digital outputs 1A
Aluminium, anodised, black, front panel colourless, 153x107x48 mm (without external plug)Function: -25°C to85°C
Storage: -45°C to 85°C
10% to 95%
150mA (without switched outputs)
CE, E14 (1OR*04*0009)
- USB master to DMR radio
- RS232 serial line
- 8 Analog input lines
- 16 Digital input lines
- 16 Digital output line
- RS232 additional serial line
- RS485 serial line
- CAN bus line
- Audio WAV file output on event
- LAN Ethernet Adaptor